반응형


유럽 최대의 자동차 메이커 폭스바겐의 국내 공식 수입사인 폭스바겐코리아 (사장: 박동훈)는 3월 8일(화) 다이내믹함과 친환경성을 동시에 갖춘 CC 2.0 TDI 블루모션(BlueMotion Technology®)을 출시한다. 지난 1월 5일에 선보인 골프 1.6 TDI 블루모션에 이어 국내에 두 번째로 출시되는 블루모션 모델이다.

폭스바겐 CC는 세단과 쿠페의 장점을 절묘하게 조합한 4도어 쿠페로 매력적인 디자인과 강력한 드라이빙 퍼포먼스는 물론 다양한 첨단 기능과 뛰어난 연비까지 갖춰 지난 2009년 2월 국내 첫 출시 후 지속적인 인기를 끌어온 모델이다. 이번에 새롭게 출시되는 CC 2.0 TDI 블루모션은 기존 CC가 가지고 있는 장점에 친환경성과 혁신을 더해 보다 매력적으로 탄생했다.

CC 2.0 TDI 블루모션은 효율적인 TDI 엔진과 DSG 변속기를 기본으로 다양한 친환경 기술이 적용되어 있다. 차가 정지했을 때 자동으로 엔진을 멈추게 하고 다시 움직이면 작동하여 불필요한 연료 소모를 줄이고 연비개선효과를 가져오는 스타트-스탑 시스템과 운전자가 브레이크를 밟을 때마다 발생하는 에너지를 배터리에 비축해 전체적인 자동차 효율성을 증가시키는 에너지 회생 시스템 등을 장착했다. 또한 CC 2.0 TDI 블루모션은 고속 주행 시 다운포스를 최적화한 에어로다이내믹 디자인으로 공기저항 역시 최소화해 17.1km/l의 혁신적인 연비를 실현했으며, 이산화탄소 배출량 역시 157g/km에 불과해 까다로운 유로 5 배기가스 배출 기준을 만족시킨다.

이와 함께 폭스바겐은 CC 2.0 TDI 블루모션을 통해 더욱 혁신적으로 진화된 주차 보조 시스템인 파크 어시스트 2.0 기능을 최초로 국내에 선보인다. 주차 시 운전자들이 가장 어려워하는 스티어링 휠을 자동으로 조절해주는 주차 보조 시스템인 파크 어시스트 기능은 기존에 후진 일렬 주차만이 가능했지만, 파크 어시스트 2.0으로 업그레이드 되어 후진 일렬 주차는 물론 T(직각) 주차와 후진 일렬 주차 상태에서 차를 빼는 탈출 기능까지 가능하다. 또한 후진 일렬 주차 시에는 앞뒤 간격이 각각 40cm, 일렬 주차 후 탈출 시에는 앞뒤 간격이 각각 25cm만 확보되면 작동이 가능해 주차공간이 협소한 복잡한 도심에서나 주차에 서툰 운전자들도 손쉽게 주차가 가능하다.

이 외에도 운전자가 차선을 유지할 수 있도록 도와 사고의 위험을 사전에 방지해주는 차선 유지 시스템인 레인 어시스트 기능과 자가 복구 기능을 갖춘 모빌리티 타이어 역시 적용되어 안전성을 극대화했다. 또한 도로 상태와 주행 상황에 따라 능동적으로 서스펜션의 상태를 조정해주는 어댑티브 섀시 컨트롤 시스템인 DCC가 기본으로 장착되어 있어 노면 상태에 따라 최적의 주행 상태를 유지해준다.

CC 2.0 TDI 블루모션은 친환경적일 뿐만 아니라 차세대 커먼레일 디젤 직분사 엔진과 6단 DSG 기어가 환상적인 조화를 이뤄 최상의 드라이빙 성능을 발취한다. 최대 출력은 170마력(4200rpm)이며, 1750~2500rpm의 넓은 실용 영역에서 6기통 3,000cc급 가솔린 엔진을 능가하는 35.7kg.m의 강력한 토크를 뿜어내 다이내믹한 디젤 드라이빙의 진수를 경험할 수 있다.

폭스바겐코리아 박동훈 사장은 “CC 2.0 TDI 블루모션은 스타일과 다이내믹한 주행 성능에 친환경적인 컨셉까지 더해져 소비자들에게 보다 매력적으로 다가갈 것으로 기대하고 있다. 앞으로 국내에 골프, CC 뿐만 아니라 블루모션 모델 라인업을 점차 확대하여 국내 친환경 자동차 시장 트렌드를 이끌어나가도록 하겠다.“고 말했다.

국내 판매 가격은 5,190만원(VAT 포함)이다.
반응형
반응형


구형 마이크로버스의 대를 이을 모델로 2011 제네바모터쇼에 등장했다. 앙증맞은 디자인과 높은 실용성으로 큰 관심을 모은 모델.

Comeback of an automotive free spirit:
World debut of new Bulli by Volkswagen in Geneva

New compact van concept has pure electric drive
Original model of the Volkswagen Bulli was first van in the world

Wolfsburg/Geneva, 28 February 2011 - The Volkswagen bus, like no other car, stands for the spirit of freedom. It debuted over 60 years ago in 1950 with a contagiously simple design. Its internal Volkswagen code name was T1 for Transporter 1. The Germans called it the Bulli, and to Americans it was the Microbus. It was driven on all continents. And the world’s first van is still appreciated by a fan base which spans the globe. Now Volkswagen is reinterpreting the compact original form of this automotive legend and sending it into the future – in the form of a concept vehicle for a new generation Bulli! It is spacious like it was in 1950, it is as inspirational as ever, and it has clean styling like never before.

In this vehicle, Volkswagen is finishing what it started in 2001: ten years ago, the vision of a new Bulli led to an unforgettable concept vehicle known as the Microbus. But some visions need to mature before they yield something new. Now, the time is right for this vision. That is because the concept was sharpened, and the necessary, sustainable technologies are now at hand. More compact and affordable than the earlier concept vehicle, it is now being shown in Geneva. The new Bulli – powered by an electric motor and fitted with six seats and infotainment control via iPad.

This concept has the potential to establish a new, fifth brand of people carrier next to the Caddy, Touran, Sharan and its large counterpart – the Caravelle. The Bulli could even become an icon like the T1 Samba that still trades at extremely high prices today – one of those few vehicles that simply do not fade with time.

Zero emissions – up to 300 km on a single battery charge

Thanks to highly advanced drive technologies, the Bulli being shown in Geneva is what is referred to as a ‘zero emissions vehicle,’ because the concept is electrically powered. Zero emissions at the tailpipe. The Bulli’s electric motor outputs 85 kW of power and an impressive 270 Newton metres of torque. As is usual with this type of drive, its maximum forces are generated from standstill. The silent motor is supplied with energy from a lithium-ion battery with a maximum storage capacity of 40 kWh. This electrifying combination enables driving ranges of up to 300 km – a high value for an electric car. When the Bulli’s battery is charged at an "electric refuelling station" specially designed for electric vehicles, the charging process takes less than one hour.

The new Bulli accelerates from 0 to 100 km/h in 11.5 seconds, and its top speed is 140 km/h (electronically limited). Its range and driving performance not only make the compact vehicle ideal for short distances; but also ideal for most commuters and recreational activities with zero tailpipe emissions.

Naturally, the concept can also incorporate Volkswagen’s extremely efficient petrol and diesel direct injection engines as alternative drives. Engines with 1.0 or 1.4 litre displacement that are fuel efficient yet strong; this is downsizing by the book. Ideal for anyone who wants to cover maximum distances with minimal fuel consumption.

Bulli – the idea goes back 64 years

Without the Dutch Volkswagen importer Ben Pon, the T1 might not have existed, and of course neither would the Bulli concept vehicle at Geneva. That is because Pon was the person who on 23 April, 1947, sketched a picture of a compact bus in his notebook. Actually, the Dutchman’s drawing was a simple side view of a radically shortened public omnibus placed over the wheelbase of a Beetle with an "m" for "motor" written on it. That was it. The world’s first van was born. Great ideas usually just take a few strokes of the pen, but then they require a dedicated effort to implement them. Volkswagen designers took this sketch and created the bus that became an automotive icon with the characteristic "V" in front.

The Bulli concept vehicle now follows in the footsteps of the original bus and demonstrates the concept of maximum space utilisation with the characteristic "V" with VW logo at the front end and the cleanest of proportions. In the process, the concept vehicle’s design follows the maxims of the new Volkswagen "design DNA." Retro? Hardly. It is a Volkswagen! The team led by Walter de Silva, Head of Volkswagen Group Design, and Klaus Bischoff, Head of Design of the Volkswagen brand, developed the "design DNA" for the modern era based on styling principles of the bestselling Beetle, Golf I and T1.

Design – visual world of a masterpiece

The new edition of the Bulli is 3.99 metres long, 1.75 metres wide and 1.70 metres tall. The T1 was somewhat longer and taller, but narrower. With a wheelbase of 2.62 metres, the Bulli utilises the overall length very well. Also striking here are the Bulli’s relatively large track widths (1.50 m front and rear) in relation to body width.

Front end: Like the Samba bus before it, the Bulli being presented in Geneva also has two-tone paint – in this case white and red. The "V" on the bonnet, is kept white. The bonnet does house the engine: instead of rear-wheel drive with a boxer engine, as on the Samba, the Bulli has an electric motor located forward of the front axle and front-wheel drive. Here it is a compact integral drive whose primary components are an E-motor, high-voltage pulse inverter and DC/DC converter for the 12-Volt electrical system.

In keeping with the Volkswagen design DNA, there is a horizontal layout of the narrow dual headlights with L-shaped LED daytime running lights and turn indicators implemented as LEDs arranged in an inverted L shape at each outer corner. Incidentally, LEDs not only exhibit tremendous luminous power and long life; due to their low energy consumption they are ideal for the electrically powered Bulli of 2011. Located between the headlights in the bonnet is, as always, the VW logo. On the level beneath, one finds – once again arranged in a horizontal line – the air intakes for the passenger compartment and for battery cooling or for cooling the alternative conventional drives.

Finally, the bumper that is seamlessly integrated in the front end completes the design. Laterally, it exhibits a large round fog light on each side, another air intake in the middle, and a front spoiler in black below. This line matches the lines of the side sills.

Side profile: The Bulli’s two-tone paint also distinguishes the sides. Treated in white is the entire area above what is known as the character line. Originating in the wings is a white stripe that runs to the distinctive D-pillars; above them, the entire roof section is painted in this colour. The continuous line of windows creates an especially striking contrast between the white sections. Here the visually slender black pillars executed in the style of the 2001 Microbus concept are visually striking. Painted in red are the door mirror housings protruding from the line of windows.

Beneath the character line is the red body area. Design elements such as the distinctive wheel housings, the additional shape modulation in the door surfaces above the side sills and the headlights that wrap around to the sides with minimal seams are details that would not have been possible to manufacture in this form and precision on a T1. Concealed in the sandwiched floor behind the sills is the 1,450 kg Bulli’s lithium-ion battery. The white door handles are practical, opening in the direction of pull. The 18-inch alloy wheels are especially attractive. At their centres are stylised chrome hubcaps – another tribute to the bus of years past. Shorter than ever are the overhangs at the front and rear.

Rear section: The Volkswagen design DNA with its horizontal lines also dominates the rear of the new Bulli. Viewed from the bottom upwards, above the body-coloured bumper (including black, stylised diffuser) there is the tailgate that extends across the entire width of the vehicle. In the tailgate, the narrow LED rear lights continue a theme from the Microbus concept of 2001. At the centre, but smaller than at the front end: the VW symbol. When all six seating locations are fully occupied, there is a 370 litre bootspace behind the tailgate.

Interior space – melding of car and iPad

Like the body design, the interior is also marked by a level of clarity whose consistent application can only be found at Volkswagen. The passenger compartment – immersed in light during the day thanks to its panoramic sunroof – also harbours some surprises.

A practical highlight: like the T1 in times past, thanks to its level floor the new Bulli is also equipped with a single bench seat in front. The van offers space for three in the rear as well.

An infotainment highlight: a removable iPad in the centre console serves as a multifunctional touchscreen. Along with Internet-based iPad applications and the media centre, it also handles control of such functions as Bluetooth hands-free telephone and a navigation system. Integrated right on the iPad mount are controls for the climate control system and the centrally located hazard warning switch.

Typical Volkswagen: all cockpit details are clearly organised and designed to be intuitive. Running laterally across the entire width is a line with air vents. In front of the driver, there is a speedometer in the shape of a semicircle. A colour multifunction display, also semi-circular in shape, can be used to view and control (via multifunctional keys in the steering wheel and on it) the navigation system, telephone, trip computer and media centre – the entire unit of speedometer and multifunction display also communicates with the iPad. The key word here is sound: a system produced by legendary guitar and amplifier manufacturer Fender (USA) ensures that the music sounds as though it were being performed live. At Woodstock in 1969, Jimi Hendrix played "The Star-Spangled Banner" – the American national anthem – on a Fender Stratocaster guitar.

What is not found in the Bulli is a tachometer (unnecessary with an electric motor) or a conventional gear shift or gear selection lever (also unnecessary with an electric motor). The latter is replaced by a rotary switch to the right of the driver, which is used to activate forward and reverse gears. A pushbutton in the same switch is used to start and stop the motor. Another rotary switch to the left of the driver is used to control the lighting functions.

Seats become reclining surface in an instant

The outer and middle seat positions of the front bench seat can be folded down (2/3 split); the rear beach seat, meanwhile, can be completely stowed. When the rear bench seat is stowed, cargo capacity increases to 1,600 litres. In addition – and here the new Bulli is reminiscent of its legendary ancestor – the seat system can be transformed into a large reclining surface with just a few manual movements. This turns the compact MPV into a compact camper – the ultimate companion for a weekend trip.

At least as important for many users, however, is that the seating system should not only be versatile but also offer maximum comfort. The seat position is comfortably high and is equally relaxing. As an added benefit, it offers an optimised view forward as well. And that is how it was in the T1 too. Contributing to peace of mind aboard today’s vehicle is the fact that the new era Bulli is equipped with all conceivable safety features. And that is the crucial difference: the car has essentially been reinvented since the days of the first T1 aka the Bulli aka the Microbus.

 

반응형
반응형



토요타 야리스 GT-S 클럽 레이서. 2010 미국 세마쇼에 출품된 야리스 커스터마이징 모델.

The Toyota Yaris is well-known as a value-driven sub-compact car with proven reliability and excellent fuel efficiency.  It has also proven in past SEMA shows to be very versatile when it comes to customization.  The little sub-compact returns to the 2010 SEMA Show, this time proving it can also be converted into a very capable race car. 
 
To make the Yaris racecar a reality Toyota Motor Sales, U.S.A., Inc. asked SportsCar  magazine to convert a 2006 Yaris five-door liftback.  The Yaris selected for the project was a veteran of the 2007 SEMA Show, formerly known as the Yaris Club project.  Toyota renamed the car the GT-S Club Racer as an homage to the popular GT-S grade Celica’s of the 1980’s and 90’s.  SportsCar magazine accepted the challenge and began remaking the Yaris into a Sports Car Club of America (SCCA) sanctioned racecar.   
 
SportsCar magazine began the project by shedding nearly 400 pounds off the vehicle’s curb weight by removing several creature comforts like the air conditioning and audio system to tip the scale at less than the 1,900 pound class minimum. 
 
The exterior of the Yaris GT-S Club Racer features a Molly Designs inspired graphics that pays homage to Dan Gurney’s All American Racers-built IMSA GTP Toyota Eagle Racers of the 1990’s. Additional exterior features include a Seibon carbon fiber hood and hatchback, AeroCatch hood pins, Racing Lifestyle fender flares, I/O Port Racing Supplies tow hooks, and Lexan side and rear windows.  The Yaris rides on three-piece JRW330 13 x 7 Jongbloed Racing wheels wrapped with Goodyear Eagle Sports Car Special 20.0 x 9.5-13 racing slicks.
 
Underneath the hood is a Toyota 1.5-liter four-cylinder engine with VVT-i.  SportsCar magazine made several modifications to increase the horsepower from the stock 106 to 145 @ 7252 RPM.  Modifications included several bolt-on performance parts including a K&N air intake, a DC Sports header, and Rebello Racing Engines camshafts and cylinder head work to name a few.  A Mishimoto radiator and Coast Fabrication Ultra Lightweight racing muffler were also added.  The engine is mated to a SPEC aluminum flywheel and three-puck clutch, a Kaaz limited slip differential and a 4.312 final drive gear set swapped in from a Scion xB.
 
To help slow the car Carbotech XP-8 brake pads and Goodridge stainless steel brake lines were added.
 
Modifications on the inside included an AiM Sports MXL race data acquisition dash system paired with an AEM Performance Electronics EMS Series 2 ECU, for complete control of the engine and data accumulation.  Safety was addressed with a Sparco Evo 2 FIA race seat and race pedals while Autopower supplied a Pro-Cam six-point harness and window net.  Additional safety features include an NRG Innovations steering wheel with a quick release hub, a Braille No-Weight battery, Longacre kill switch and mirrors, and an Emergency Suppressions Systems fire system.
 
Once completed, it was time to race.  The Yaris GT-S Club Racer won its very first race, topping the competition at Willow Springs Raceway in Southern California.  Driven by SportsCar magazine associate editor Jason Isley, the little racecar went on to win the Southern Pacific H Production Division Championship.  Capturing its division qualified the Yaris for the 47th SCCA National Championship Runoffs at the historic Road America circuit in Elkhart Lake, Wisconsin where it competed in late September.  At the championships, it qualified 13th and finished a very respectable 8th out of a field of 26.  Competing against older classics, it was the newest car in the field by 19 years!
 
After the SEMA Show, Toyota and Sony Computer Entertainment America LLC, will host the producers of Gran Turismo® 5 at a race track where they will compare their “virtual” racing skills versus their “actual” racing skills by driving the GT-S Club Racer in a time trial format.
 
# # #
 
Yaris GT-S Club Racer Features
 
Exterior:
Molly Designs inspired graphics
Seibon carbon fiber hood and hatchback
AeroCatch hood pins
Racing Lifestyle fender flares
I/O Port Racing Supplies tow hooks
Lexan side and rear windows
 
Tires/Wheels:
Goodyear Eagle Sports Car Special 20.0x9.5-13 Racing Slick
Jongbloed Racing Wheels three-piece JRW330 13x7
 
Interior:
AiM Sports MXL race data acquisition dash system
Sparco Evo 2 FIA race seat
Sparco race pedals
NRG Innovations steering wheel with quick release hub
Autopower Pro-Cam 6-point harness
Autopower window net
Braille No-Weight battery
Longacre kill switch
Longacre mirrors
Emergency Suppression Systems fire system
 
Suspension:
AST Suspension – USA custom 5100 series dampers
Eibach ERS springs 550lbs front/650lbs rear
Whiteline adjustable rear swaybar
 
Brakes:
Carbotech XP-8 pads
Goodridge stainless steel brake lines
 
Engine:
Toyota 1NZ-FE 1.5 liter with VVT-i 145hp@7252rpm
Rebello Racing Engines camshafts and cylinder head work
AEM Electronics EMS Series 2
AEM Electronics UEGO wideband O2
MP Tuning custom harness
Church Automotive Testing tune
Okada Projects USA Plasma Direct Coils
K&N Air Intake
DC Sports header
Coast Fabrication Ultra Lightweight Racing Muffler
Mishimoto radiator
Pure Power 10W-20 racing oil
Pure Power Lifetime Oil Filter
 
Drivetrain:
SPEC aluminum flywheel and three-puck clutch
Kaaz limited slip differential
Scion xB final drive swap (4.312)
 
Participating Suppliers:
AiM Sports: aimsports.com
AEM Electronics: aemelectronics.com
AST Suspension - USA: ast-usa.com
Autopower: autopowerindustries.com
Beta Motorsports: betamotorsports.com
Braille Battery: braillebattery.com
Church Automotive Testing: (310) 518-4966
Coast Fabrication: coastfab.com
Eibach: eibach.com
Emergency Suppression Systems: essfire.com
Fast Lane Racing School: raceschool.com
Garage Graffix: garagegraffix.com
Goodyear: racegoodyear.com
Hiro’s Auto Repair: hiros-auto.com
I/O Port Racing Supplies: ioportracing.com
Jongbloed Racing Wheels: jongbloedracing.com
Kaaz: kaazusa.com
K&N: knfilters.com
Longacre: longacreracing.com
Mishimoto: mishimoto.com
MP Tuning: mptuning.net
NRG Inovations: getnrg.com
Okada Projects USA: okadaprojects.com
Pure Power: gopurepower.com
Racing Lifestyle: racinglifestyle.com
Rebello Racing: rebelloracing.com
Seibon: seiboncarbon.com
SPEC: specclutch.com
Sparco: sparcousa.com
Tire Rack: tirerack.com
Toyota Racing Development: trdusa.com
Whiteline: whiteline.com.au 
반응형

'Toyota' 카테고리의 다른 글

토요타 3세대 야리스 풀 사이즈 이미지  (0) 2011.07.14
토요타 프리우스 C 컨셉트카  (0) 2011.05.21
2011 토요타 코롤라  (0) 2011.03.10
토요타 야리스 HSD 컨셉트카  (0) 2011.03.08
토요타 FT-86 II 컨셉트카  (0) 2011.03.02
반응형


2011 유럽형 닛산 GT-R
반응형
반응형



벤틀리모터스는 자사의 슈퍼 스포츠카인 벤틀리 컨티넨탈 수퍼스포츠 컨버터블이 핀란드 연안에 접해있는 발틱해의 빙판에서 330.695km/h의 속도를 기록해 빙판 위 최고속도를 측정하는 ‘아이스 스피드’ 세계 신기록을 다시 한번 경신했다고 발표했다.

세계 신기록인 330.695km/h의 기록 측정은 핀란드 경찰의 입회 하에 발틱해 연안의 호수에서 이뤄졌으며, 1000 미터를 양방향으로 두차례 주행한 후 평균값을 계산해 이뤄졌다. 세계 랠리 챔피언에 4차례 오른 바 있는 핀란드 출신의 유하 칸쿠넨 (Juha Kankkunen)이 드라이버를 맡았다. 유하 칸쿠넨은 영하 30도의 기온과 두께 70cm의 빙판 위에서 숙련된 드라이빙 스킬을 선보여 신기록 달성에 일조했다.

벤틀리모터스의 신임 회장 볼프강 뒤르하이머 (Wolfgang Dürheimer)는 “유하 칸쿠넨의 숙련된 기술과 드라이빙에 대한 열정 덕분에 세계 신기록 수립이 가능했다”라고 밝히며 “벤틀리는 세계신기록 달성을 축하하는 의미에서 이번 세계신기록을 세운 차량과 동일한 스펙의 차량을 한정판으로 출시할 예정이다. 이 한정판 모델은 가장 파워풀하면서도 안정성 역시 극대화된 궁극의 컨버터블 모델로 역사에 남게 될 것”이라고 밝혔다.

오는 3월 1일 제네바모터쇼에서 첫 선을 보일 컨티넨탈 수퍼스포츠 아이스 스피드 레코드(Ice Speed Record)는 100대 한정 생산될 예정이다. W형 12기통 6.0ℓ 트윈 터보 엔진을 장착했으며, 최대 출력과 최고 토크는 각각 645마력 및 800Nm이며, 최대 속도는 325km/h에 달하고 정지상태에서 100km/h까지 가속하는데 걸리는 시간은 4.0초에 불과하다.
반응형
반응형



존다의 뒤를 이어 등장한 이태리 수퍼카 메이커 파가니의 최신작. 앞모습이 다소 괴기스럽지만 전체적으로 수퍼카의 아우라를 자랑한다.


Ancient legends of the Aymara tell us of Huayra Tata, god of wind, who commands the breezes, winds, and blizzards that invade the mountains, cliffs and hills of the Andean highlands. It is told that Huayra Tata resides deep in the high peaks and valleys, abandoning them only to demonstrate his power to his wife, Pachamama, goddess of mother earth. With his power Huayra Tata was able to lift the waters from lake Titicaca and rain them down on the fertile Pachamama. When Huayra Tata sleeps, the waters and rivers lay quiet.
But the calm before the storm is about to be interrupted...

Design

The eternity of the element air. Gentle and refined, yet the strength of the wind it is able to erode even the toughest of materials giving birth to distinctive shapes known in nature.
Elegant and muscular the Huayra merges the past, present and future in a timeless interpretation of automotive art.
The styling of the car was perfected over the course of 5 years to find each line’s beginning and end. During this study, eight scale models were created, as well as two 1:1 models, each an evolution of the previous in a never ending quest to perfect the form and refining the substance. The bi-xenon headlamps are just one of the many precious gifts from the Zonda R, and LED daytime running lights are seamlessly integrated in the elliptical shape of the design.
The rear bumper integrates with the diffuser and is dominated by an elliptical frame that surrounds the four central exhaust outlets, now becoming a characteristic Pagani element.

Backbone

The new central monocoque on the Huayra is an entirely new design made from carbontitanium. However, with the gull wing doors cutting deep into the roof, much research was focused on achieving the highest levels of rigidity through the application of new advanced composite materials and technologies first tested on the Zonda R. The fuel tank is located integrally in the best protected area of the monocoque, behind the driver, reinforced by safety cell made of different composite and ballistic materials. The front and rear CrMo subframe soffer an exceptional rigidity-to-weight ratio to allowing the suspensions to work at their best while incorporating an advanced energy absorbing crash structure, ready to protect the occupants in the unlikely event of an impact.
The never ending quest for weight reduction resulted also into the combination of structural and non-structural or aesthetical elements. An example is the integration of all ventilation air ducts into the monocoque’s structure, making the use of additional parts and ducts unnecessary. The result of this attention to detail is a vehicle weighing 1.350 kg making the Huayra the lightest sportscar in its class.

Heart

Mercedes-AMG provides the heart for the Huayra. The 60 degree 12 cylinder turbocharged engine with a displacement of 5980 cm3 has been developed not just to meet the strictest technical and quality requirements, but also to give the car its many faces. The calm and harmony of driving one of the world’s most refined GT car is interrupted when the driver calls upon the Huayra to unleash its 700 horsepower and 1000 Nm of torque. The turbos have been studied to offer immediate response to the slightest throttle input, giving the driver full control over the engine at any rpm and preventing unwanted delays in the delivery of power. The engine’s systems have been designed and tested to stand up to the most adverse conditions of temperature and performance. The Huayra has been subjected to the highs of Death Valleyand the lows of the Arctic Circle. The two lateral radiators are positioned in the front to guarantee the best cooling efficiency of the intercoolers placed over the cylinder heads.
Drysump lubrication ensures an optimal oil feed to the engine even when the car is subjected to the most extreme lateral accelerations. It also regulates the oil flow so that only the necessary amount of lubricant is actually pumped into the engine from the external oil tank, reducing the friction caused by an excessive volume of lubricant inside the engine sump. An oil/water heat exchanger reduces warm-up times by heating the engine lubricant during cold start and keeps engine coolant and lubricant levels at steady operational temperatures. Extensive weight saving programs led to ingenious yet simple solutions. In order to reduce hoses and connections as much as possible is built directly to the engine. The intercooler covers serve as expansion tanks to the low temperature circuit and the engine coolant circuit. The vertical fins contribute to the cooling of the tanks. The M158 engine is homologated to meet the strictest environmental regulations, EU5 andLEV2.

Despite the increase of power compared to the other Mercedes-AMG V12 engines developed for Pagani, CO2 emissions as well as the fuel consumption have been reduced, to make the Huayra class leading amongst 12 cylinder sports cars with values that are respective of much smaller vehicles in the market. The two stage fuel supply system features two microprocessor controlled pumps feeding fuel to the engine with the second pump only activated when necessary, thus reducing the energy required to run the fuel pumps and eliminates the waste of excessive fuel being transported and heated in the fuel lines. This efficiency combined with a large 85 liter fuel tank ensure Huayra’s grand touring ability. As an homage to the decennial tradition of Mercedes-AMG in building world class sports car engines, the M158 displays the historic AMG emblem on the intake manifold alongside the name of the technician that assembled the engine by hand at the Mercedes-AMG headquarters in Affalterbach, Germany. The Titanium exhaust system has been engineered by MHG-Fahrzeugtechnik and is a direct application of race proven technologies on a high performance road car and the complete exhaust weighs less than 10 kg. Hydroformed junctions are used to reduce backpressure and guarantee a free flow of the exhaust gasses.

Titanium guarantees a low weight in the muffler area while Inconel guarantees reliability on the parts of the exhaust more exposed to high temperatures. Careful attention has been paid to the tuning of its sound, which has led to a harmonic rumble at idle speeds with a hint of the power that lies hidden at low speed and a deep thunderous growl of motor and air, reminiscent of an airplane, at high speeds.

Feet

The power and prodigious torque generated by Huayra’s V12 are transferred to the wheels through a transverse sequential seven speed gearbox and a dual plate clutch and the complete gearbox weighs only 96 kg. Keeping the weight of the rear overhang as low as possible has been a priority as we aim for a neutral behavior at the limit. A further benefit of this layout is a better behavior of the car during a rear impact. A dual clutch system was evaluated but ultimately not selected as it would have increased the weight by approximately 70kg, thus negating any minor improvement in shift-time.

Xtrac already supplied the gearbox for the Zonda R and so it was the natural choice for the development of a new high performance gearbox.
Xtrac’s expertise in motorsports was obvious throughout the design and material selection processes that resulted in the strongest and lightest gearbox possible suitable for road use, with a synchromesh box that offers comfort levels a race car gearbox will never be able to offer. The suspension geometry has been designed to further enhance the sure-footed nature already present in the Zonda on the longer wheelbase Huayra. The individual suspension made with forged AvionAl double A-arms have been tested extensively on the Zonda R programme. Incorporated into the wheel hub assemblies are cooling ducts that connect directly to the support brackets, thus extending the reliability and lifespan of the bearings.
Pushrod operated adjustable Öhlins shock absorbers keep everything under control and have been optimized for the dynamic requirements of the vehicle.

"Power is nothing without control"

Pirelli say “Power is nothing without control” and to assure complete control for the driver Pirelli has developed the bespoke P Zero tires, specifically for the Huayra. The Pirelli engineers were faced with a demanding task, combining road holding for excitement behind the steering wheel and lower rolling resistance to reduce CO2 emissions and fuel consumption. These PZero tires are built in a dedicated MIRS™ (Modular Integrated Robotized System) facility, dedicated to the production of ultrahigh performance tires and are at the forefront of what is technically possible, suited to top speeds above 370 kph as well as to lateral forces exceeding1,5 G.

Skin

The aerodynamic concept of the Huayra is that of a wing. The vehicle can modify the properties of this wing by varying the front ride height, which can be adjusted dynamically, and by adjusting the 4 control flaps on each of the four corners of the car. The goal is to have a neutral vehicle behavior under all conditions and control body roll via aerodynamic means. The behavior of the flaps is managed by a dedicated control unit that is fed information from the ABS and ECU, which pass information about the car’s speed, yaw rate, lateral acceleration, steering angle and throttle position. The system improves aerodynamic efficiency in a variety of driving conditions, where a low drag coefficient is not the determining factor. During braking, for example, the rear flaps and the front suspension are raised to counteract the weight transfer and balance the weight distribution between front and rear axles, allowing a better use of the rear brake force. Another vital design tenant for the Huayra project was to ensure clean airflow over the body of the car. The shape of the two engine air intakes behind the occupants shoulders are a tribute to the supersonic aircraft of the late 1950s and 1960s, but also allow the motor breath without disrupting the flow. The intake for the gearbox radiator is located between the engine bay window and the carbon clamshell of the rear bonnet, which provides an excellent airflow to the radiator without having a substantial impact on aerodynamic drag. This decision also led to the omission of a rear wing, replaced by the movable flaps. The flow of air through the car was also carefully studied. The radiators are angled to contribute downforce and provide the best flow for hot air to be extracted. Air from the central radiator is extracted by vents on the front bonnet and trough the front wheelhouses. Air from the side radiators is channeled to ducts cooling the brake discs and wheel hubs. This air blows onto the brakes at a temperature of approximately 50°C warming the brakes up when cold and improving the first bite significantly. Lateral air outlets behind the front wheels generate a negative pressure inside the wheelhouse providing efficient extraction to lower the drag coefficient and generate downforce on the front. In addition to the downforce generated by the flaps and body, two high negative pressure areas were designed into the shape of the underbody and the diffuser at the rear, thus enhancing the aerodynamic stability and guaranteeing the Huayra downforce under all circumstances.

Man-machine

As soon as the doors are closed the Huayra transports the occupants to a new dimension; aworld that pleases and surprises the senses. Having everything at arm’s length is not closeenough for a vehicle with the capabilities of the Huayra. Consequently, the driver will find all primary functions directly on the steering wheel. The gearshift paddles are mounted directly to the steering wheel so the driver never needs to take his hands off the steering wheel. The seats provide both the comfort to make long trips enjoyable as well as the lateral support required when the g-forces build up on extreme driving. A Pagani is able to present drivers with state of the art solutions while still drawing on the rich history that precedes it. The ever present emphasis is on a living breathing being rather than a digital one. This can be seen in everything from the leather latches to the toggle switches, but this ethos finds its purest expression in the mechanical aluminum gearlever assembly, a monument to the art of the manual gearshift; progress that does not deny the past. The aluminum dashboard takes inspiration from the most complex swiss watch designs and includes a central Multi-Function Display displaying performance relevant information when SPORT mode is engaged and a trip computer when the COMFORT mode is activated. The aluminum center console is machined from one solid block of aluminum and features a clarinet style array of mechanical switches controlling the HVAC system. The high definition central touch screen is the heart of the vehicle infotainment system, controlling audio functions, satellite navigation, secondary vehicle functions and Bluetooth phone.

On the road

To this date five prototypes have been built which have been conducting road tests for the past4 years. Currently, over half a million kilometers have been covered by our prototypes and before entering the US market we will have reached one million test kilometers. Each prototype has been assigned to a specific development task. At Mercedes-AMG one is used to develop drivability, and another is used for emission development. One car is operated constantly by Bosch Engineering for the application of ABS and advanced stability and performance enhancement systems. Still another vehicle is used for gearbox testing, and general vehicle dynamics development.

Safety

The car complies to the strictest European and American standards in term of safety and pollution regulations. Several studies were conducted to determine the most frequent types of crashes involving high performance cars. The results of these studies have let us to develop specific safety measures not required by law but to guarantee an enhanced protection for the occupants. Several cars have been used to perform these tests.

반응형

+ Recent posts